An advanced, high power controller that features 6x 6.3A stepper drivers, 4 high current heaters, 6 fans and more

An advanced, mid range controller that features 5x 2A stepper drivers, 3 high current heaters, 4 fans and more.

An advanced, high power controller that features support for 6 external stepper motor drivers, along with similar outputs and IO as the Duet 3 Mainboard 6HC.

A high power Duet 3 expansion board that features 3x 6.3A stepper drivers, 3 high current heaters, 6 fans and more

The Duet 3 Tool board: a CAN-FD connected expansion board for Duet 3, designed to provide complete control for a direct drive extruder.

The Duet 3 Expansion 1HCL is a CAN-FD connected expansion board.

The Duet 3 Motor M23CL is a family of closed loop, CAN-FD connected NEMA 23 motors.

The Duet 3 Roto Toolboard is designed to integrate easily with the E3D Revo Roto extruder and the Revo hotend heaters and temperature sensors.

The Duet 3 Scanning Z probe allows for quick inductive scans of metallic bed surfaces to build a point mesh of the surface to be used for mesh bed compensation.

The Duet3D Magnetic Encoder is a precision motor encoder compatible with the Duet 3 Expansions 1HCL

CAN-FD connected expansion board for the Duet 3 Mainboard that provides connection to an external stepper driver and associated peripherals.

An expansion board for the Duet 3 Mini 5+ that provides an additional 2 x TMC2209 stepper motor drivers.

This board allows for the connection of up to 4 Duet 3 Toolboards to the Duet 3 Mainboard at one time, greatly simplifying the CAN-FD bus and power wiring.

The PanelDue is a colour touch screen controller for the Duet and other 3D-printing electronics that support it.

The Duet3D Roto Filament Monitor integrates tightly with the Duet 3 Roto Toolboard and accurately senses filament movement to detect clogs, filament run out and other extruder issues.

The Duet3D Filament Monitor accurately senses filament movement to detect clogs, filament run out and other extruder issues.

A standalone accelerometer board using the LIS3DH MEMS digital motion sensor. It is designed to plug into the SPI daughterboard header on Duet 2 and 3 mainboards.

The Smart Effector for delta printers allows the hotend to be used as a Z probe giving fantastic accuracy across the whole delta build area by eliminating the effect of tilt.

Duet 2 is an established and proven 32 bit electronic controller for 3D printers and other CNC machines.

A 5 driver expansion board for the Duet 2 Wifi and Ethernet.

The breakout board allows the connection for up to 5 external drivers to the Duet 2 Wifi, Wifi-EA and Ethernet controllers.

This is a daughterboard specifically designed for the Duet range of controller boards.

This is a daughterboard specifically designed for the Duet 2 and Duet control boards that allows two Thermocouples to be attached.

A distance sensor used as a Z Probe that uses differential modulated Infra Red light

Plugin ESP32 WiFi module designed for the Duet 3 Mainboard 6HC v1.02 and later

The Ethernet Networking module for a Duet 2 Ethernet Board. It comes with standoffs and pin headers for mounting on PCB socket strips which are also supplied.