Duet Expansion Breakout Board
The breakout board allows the connection for up to 5 external drivers to the Duet 2 Wifi, Wifi-EA and Ethernet controllers.
Product description
This breakout board connects to the expansion header on the Duet 2 Wifi, Wifi-EA and Ethernet controllers and is specifically designed for external drivers that take differential signals. It breaks out each of the 5 Expansion header stepper channels as follows:
Step+
Step-
Dir+
Dir-
En+
En-
It also breaks out heater 6 and 7 signals to 5V.
FEATURES
| Connectivity | It comes with Molex KK compatible connectors and crimps, along with the 50way IDC cable to connect to the Duet expansion header |
| Voltage | Provides a differential output signal of -3.6V to +3.6V. Can also be used in an open collector mode with the +’ve signal lines form the external driver connected to one of the two +5V terminals on the board |
Documentation
| Hardware overview | GO TO DOCUMENTATION > |
RELATED PRODUCTS
Duet 2 is an established and proven 32 bit electronic controller for 3D printers and other CNC machines.
A 5 driver expansion board for the Duet 2 Wifi and Ethernet.
This is a daughterboard specifically designed for the Duet range of controller boards.
